Open, low-maintenance fencing for acreage and frontage. Two, three or four rail in cedar or treated pine, with posts set to survive clay soil and cattle alike.
Get a Free QuoteRanch rail looks simple, which is exactly why it gets built badly. Long runs magnify every error: one post out of line is visible from a hundred yards, and one post set shallow will lean before the second summer.
We string and set the whole run before a single rail goes on, so the line is true. Corner and gate posts get oversized holes and more concrete, because those are the posts that take the load.
Open frontage and property lines where you want the boundary read, not the view blocked.
The working standard for paddocks and acreage. Good balance of strength and sightline.
Tighter spacing for smaller livestock or where you want a more finished look.
Welded wire or no-climb mesh added behind the rails to hold dogs and small stock.
Ranch rail shows up on the edges of Dallas County, out past Seagoville and Sunnyvale and on the acreage that has not been subdivided yet. Those runs are long, and long runs are where clay soil does the most damage: a post that moves an inch at grade reads as a bend from the road. We set corners and gates deeper than line posts, brace them, and check the string twice before rails go on. Where a property backs onto a creek or a drainage easement we leave the bottom rail high enough that debris does not dam against it.
The classic Dallas backyard fence, built so it still looks classic in year eight. Western red…
Galvanized panel set in a cedar or steel frame. Open enough to keep the view, tight enough to…
Fences built to your association’s spec, documented for the architectural committee, and…
Barrier fencing built to the code that actually gets inspected: height, gap, and a gate that…
We walk your Dallas property, give you a straight price, and show you exactly how we build it to last.
The 1/3 rule, Dallas clay-soil considerations & why deep-set posts in real concrete keep a fence straight
2026 price ranges by material (wood, vinyl, iron, chain link) plus what drives cost.
How to choose a fence contractor in Dallas: questions to ask, red flags to avoid, and why in-house crews &...