Free, no-pressure on-site estimates across all of Dallas County, family-owned & backed in writing. Free estimates · All of Dallas County Call (469) 265-6259 →
Composite · Dallas County

Composite Fencing in Dallas, TX

Composite for people who are done with the stain cycle. Colour runs through the board, it does not warp or splinter, and we are a Trex Certified Installer.

Get a Free Quote
Why Estrada

A system, not a picket

Composite is engineered as a matched set: posts, rails and infill designed to move together. Most composite failures come from treating it like wood, mixing components between brands or stretching spans past what the rail is rated for.

We build to the manufacturer’s span and fastening spec, and we leave the expansion gaps the material needs. Composite moves with heat, and a Dallas summer is exactly when a fence built tight will start to buckle.

  • Trex Certified Installer, built to the manufacturer’s spec
  • No staining or sealing cycle, ever
  • Colour runs through the board, so scuffs do not show raw material
  • Rail spans and fastening to rating, with expansion gaps left in
  • Steel-reinforced posts where wind exposure calls for it
What we build

Options & configurations

Trex Seclusions

The full privacy system: composite posts, rails and interlocking pickets.

Composite & Steel

Composite infill on steel posts where you want maximum wind rating.

Colour Matching

Selected against your house and any existing composite decking.

Deck & Fence Together

Built as one job so the colour and line actually match.

Owner on every job
In-house crews, no subs
Set deeper than code minimum
Written workmanship warranty
Built for Dallas

Composite Fencing for Dallas yards

Composite makes the most sense on two kinds of Dallas job. The first is HOA-governed neighbourhoods where the covenant wants a uniform look held for years, and a stain cycle across a whole street never stays uniform. The second is west-facing runs that bake all afternoon, where a wood fence greys within two seasons. The trade-off is heat movement: composite expands more than cedar in a Dallas August, so the gaps we leave at install are deliberate, not sloppy, and a fence built without them is the one that buckles.

More fence types

Explore other options

Driveway Gates

A driveway gate is a fence that moves, which is why it fails differently. We size the frame,…

Automatic Gate Openers

Operators, safety devices and access control, fitted to a gate that has been made true first….

Fence Staining & Sealing

Stain fails on timing far more often than on product. Cedar has to dry out before it will take…

Storm Damage Fence Repair

Make the yard secure first, document it properly for the claim, then rebuild the failed section…

Common questions

Questions from people who are done with the stain cycle.

Does composite get hot in Texas sun?

It warms more than wood, which matters on a deck underfoot and much less on a vertical fence you walk past. Colour choice makes a real difference, and lighter tones stay noticeably cooler on a west-facing run.

Why are there gaps left at the board ends?

Because composite moves with temperature and the system is designed for it. Those gaps are deliberate. Fitting the boards tight is how you get buckling in August, and it is the most common fault we see on composite installed by someone treating it like wood.

Can I mix composite boards with another brand's posts?

We would not. Composite is engineered as a matched set, so posts, rails and infill are designed to expand together, and mixing components is where most composite failures start. It also tends to void the warranty that made composite worth buying.

What composite trades away

No stain cycle, but the install has to allow for heat

Composite removes the maintenance that makes people tired of a timber fence. What it asks in return is respect for how much it moves in heat. A composite board in full Texas afternoon sun expands measurably along its length, and a fence built tight, because tight looks better on install day, has nowhere to put that expansion.

  • Expansion gaps that look deliberateGaps are set at the ends of every board according to the temperature on the day of install. They are not a defect and they are not sloppiness. Left out, boards bow between posts by the first real heat.
  • Fasteners that allow movementBoards get fastened so they can grow and shrink along their length rather than being pinned at both ends. Pinned, the board has only two options, and both of them are visible.
  • Framing built for the claddingComposite is heavier than cedar and wants support at the spacing the manufacturer specifies. Hung on a frame designed for timber, it sags between supports in a way timber would not.
  • Colour chosen for heat as well as looksDarker composite runs considerably hotter in direct sun and moves more as a result, which means larger expansion gaps and more visible movement. On a fence in full afternoon sun the colour decision is partly a structural one, and it is worth knowing that before choosing from a sample in the shade.

Composite suits people who want the fence to look the same in year eight as it did in year one, and who would rather not spend a weekend staining to get there. Composite costs more up front than cedar and the case for it is made over ten or fifteen years of not staining. If you are likely to move within a few years, cedar is usually the better financial decision, and we will run that comparison with you honestly rather than steering you to the larger invoice.

Ready when you are

Get your composite fencing quote, free and no-pressure.

We walk your Dallas property, give you a straight price, and show you exactly how we build it to last.