Ornamental Iron Fence Installation in Dallas, TX

Q: Is iron fencing good for pools?

Yes — iron is a popular pool-code-compliant option. We build enclosures that meet safety requirements while keeping sightlines open and elegant.

Why Estrada

Security and curb appeal that lasts

Ornamental iron gives you an open, elegant look with serious security, ideal for front yards, pools, and properties where you want to see through the fence without giving up protection.

We install powder-coated wrought-iron and tubular steel that resists rust and holds its finish for years, set on deep, concreted posts. Simple or ornate, and pool-code compliant when you need it.

Wrought-iron & tubular steel, powder-coated to resist rust
Pool-code compliant heights & spacing
Open, elegant sightlines with real security
Custom panels, finials & matching gates
Set on deep, concreted posts, built for decades

Dallas County, TX

Styles we build

Ornamental Iron Fencing styles & options

Classic Picket Iron

Timeless flat-top or spear-top steel for front yards & lines.

Pool-Code Iron

Compliant heights and spacing to pass inspection.

Ornamental & Custom

Decorative scrolls, finials, and custom panels.

Iron Gates

Matching walk and driveway gates, manual or automatic.

Owner on every job

In-house crews, no subs

Set deeper than code minimum

Written workmanship warranty

More fence materials

Explore other fence types

Wood Fencing

Explore wood fencing in Dallas County →

Vinyl Fencing

Explore vinyl fencing in Dallas County →

Chain Link Fencing

Explore chain link fencing in Dallas County →

Built for Dallas

Ornamental iron fencing for Dallas homes

Ornamental iron fencing gives Dallas properties security and timeless curb appeal without walling off the view. We fabricate and install powder-coated steel fencing and custom gates in classic, flat-top, and spear-top styles, with decorative finials, pressed points, and puppy-picket options for pets. It’s the go-to for estate frontages in Preston Hollow, pool enclosures in Lakewood, and front-yard accents in the Park Cities, where an open, elegant look matters as much as security.

Unlike the old wrought iron that rusted through, modern ornamental iron is welded from galvanized steel and powder-coated, so it stands up to Dallas humidity, hail, and hard sun for decades. We set posts in concrete below the expansive black clay that shifts across the Blackland Prairie, core-drill into existing masonry when needed, and can integrate iron panels between brick or stone columns for a high-end, custom look that suits Dallas’s older neighborhoods and new estates alike.

Iron is also the material of choice for pool safety fencing in Dallas, and we build to the code required for pool enclosures, self-closing, self-latching gates and proper picket spacing. Add a driveway gate with an automatic operator, keypad, or smartphone control, and your ornamental iron fence becomes a full security upgrade. From wrought-iron-style yard fencing to grand entry gates, we help homeowners across the Dallas-Fort Worth metro frame their property with steel that looks as good in ten years as the day it went in, backed by our written workmanship warranty.

We also repair and re-stretch existing iron fences, replace rusted pickets and rails, and re-powder-coat gates that have seen too many Dallas summers. From tubular steel yard fencing to heavy-gauge estate gates in Preston Hollow and the Park Cities, every ornamental iron project is welded in-house, set in concrete, and backed by our written workmanship warranty.

Good to know

Ornamental iron fencing in Dallas, what to know

Ornamental iron adds security and timeless curb appeal without blocking your view. Powder-coated to resist Texas rust, it frames a front yard, pool, or estate beautifully. Here’s what Dallas homeowners ask about iron fencing.

Does ornamental iron rust in Texas?

Modern ornamental iron is powder-coated over galvanized steel, which resists rust far better than old wrought iron. With a quality finish, it holds up for decades in the North Texas climate.

Is iron fencing good for pools?

Yes, iron is a popular pool-code-compliant option. We build enclosures that meet safety requirements while keeping sightlines open and elegant.

Can I set iron between brick or stone columns?

Definitely. Iron panels between masonry columns are one of the most upscale, durable looks available, and a specialty of ours.

Estrada Fencing & Outdoor Living serves the Dallas-Fort Worth metro, visit our homepage or explore our fence installation.

Where iron fences actually corrode

Rust starts at the cut end and the footing, not the surface

A powder coated iron fence rarely fails across its face. It fails at the places the finish was broken or never reached: the ends where a picket was cut on site, the welds, and the few inches of post that sit at the soil line where wet clay stays against the steel long after the surface has dried.

Cut ends sealed on siteEvery field cut opens bare steel. Left as cut, that is where the first bloom of rust appears and then tracks back under the coating. We seal cut ends before the section goes up, which costs minutes and buys years.
The soil line treated as the weak pointWe set posts so the vulnerable band at grade is protected and drained rather than sitting in a puddle of held water. Most iron fences that look tired at ten years are sound everywhere except the last few inches above the footing.
Panels racked to the slope, not stepped over itOn a graded yard, panels that follow the fall look deliberate and leave no gaps underneath. Stepping panels on a slope leaves triangles at the bottom that a dog finds within a week.
Gaps set for what you are containingPicket spacing is a decision, not a default. What keeps a large dog in will not keep a small one in, and pool enclosure rules constrain spacing separately again. We settle that at quoting, because respacing an iron fence after fabrication is not an adjustment, it is a new fence.

Iron is the material people choose when they want to see through the fence and still be enclosed. Kept sealed at the ends and drained at the base, it is also the one that asks least of you afterwards. Ask any contractor how they finish a field cut and how they handle the post at grade. Those two answers tell you most of what you need to know about how the fence will look in ten years, and they take about a minute to ask. Everything else about iron is largely a matter of style and spacing.