Free, no-pressure on-site estimates across all of Dallas County, family-owned & backed in writing. Free estimates · All of Dallas County Call (469) 265-6259 →
Patio Covers · Flower Mound

Patio Covers in Flower Mound, TX

Under mature trees or facing a fairway, a cover adds the rain protection and steady shade that a tree canopy alone cannot give a patio. Serving Flower Mound and all of Denton County.

Call (469) 265-6259

Get your free quote

Two quick steps. We call back within one business day.

Why Estrada

Engineered for wind and old slabs

Flower Mound sits in the Eastern Cross Timbers, and many back yards in Bridlewood, Wellington and Canyon Falls open onto mature trees, golf course or open space. A cover that reads as part of the house lets you sit out in that setting through the heat without losing the view.

Flower Mound sets out how a shade structure has to stand, so structure comes first in our design. At the first visit we check the slab type, because a post-tensioned slab changes how posts can connect, and we ask early whether you want cedar framing, which brings in an engineer. Our drawings show exactly how the cover connects to the house structure. Then we look at the trees and the view, setting the roof height so it shades the patio without blocking the course.

  • Fans and lights wired under the cover
  • 3D rendering to check the view line
  • Plans ready for your HOA review
  • Insulated roof that cuts summer heat
  • Owner on site through final inspection
Gable patio cover with a stone fireplace, mounted TV and kitchen bar looking out over a pool
Flower Mound, TX
What we build

Patio cover options in Flower Mound

Attached Solid Roof

An insulated roof off the back wall that keeps rain off the patio.

Detached Shade Structure

A freestanding cover set out toward the trees or the fairway.

Cedar Frame Cover

Natural cedar posts and beams, built from an engineer’s stamped design.

Course View Cover

A low roof line that keeps the view out to the fairway or greenbelt.

Design first

Want to see it on your house first?

Some owners like to see the roof pitch and post spacing before they commit. We can model the cover against your house in 3D so you can try a different size or finish on screen.

Mention it when you book the measuring visit in Flower Mound.

Ask about a 3D rendering
3D design rendering of a cedar pergola over a fire pit seating area beside a brick home
3D rendering

Before you build a patio cover in Flower Mound

  • Flower Mound requires an attached solid-roof cover to meet the same regulations as the house it is attached to. A detached or open-roof shade structure must sit at least 5 feet from the rear and interior side property lines, follow the house’s setback on the street side of a corner lot, stay out of easements and stand 5 feet from other buildings, except open-roof arbors.
  • A shade structure can be no taller than 14 feet from grade to peak, or 20 feet in SF-E and Agricultural zoning, and its roof color and materials must closely resemble the roof of the house.
  • Posts sit on concrete piers 12 inches across and 18 inches deep, and the cover must be designed for the town’s stated wind and uplift loads. Doweling into an existing post-tensioned slab requires an engineer’s design, and any structure with cedar framing members must be designed and sealed by a Texas licensed engineer.
  • The permit is applied for through eTRAKiT with framing, foundation and elevation drawings, an electrical plan when fans or lights are included, and a detail showing the cover attached into the wall or roof framing rather than the veneer. Work has to start within 45 days of the permit and pass final inspection within 60 days.

Flower Mound HOAs

Bridlewood’s 11 neighborhoods share one HOA, Wellington is a large established subdivision and Canyon Falls is a newer community, and associations like these typically review exterior additions such as patio covers. The town says plainly that it does not enforce deed restrictions, so HOA approval is on the owner. Estrada matches the roof pitch, the shingle or metal finish and the trim color to the house and prepares the plans for the HOA submission.

Source: Town of Flower Mound Shade Structure Information Packet (rev. 10.01.2026) Town of Flower Mound Accessory Building Information Packet (rev. 10.01.2026)

Owner on every job
In-house crews, no subs
Permits handled
Written workmanship warranty

Common questions in Flower Mound

Will Flower Mound require a permit for my patio cover?

It will, and the town expects work to begin and wrap up on a set schedule once the permit is issued. Estrada applies online with the drawings the town asks for, then keeps the job moving toward final sign-off.

What should I settle before the Flower Mound permit is pulled?

The town’s clock starts when the permit is issued, so decide on fans and lights, framing material and roof finish first. Get your HOA answer in hand too. With those settled, we file and the build runs straight through to final inspection.

Should I get HOA approval before the town permit?

Yes, in most cases. The town will not check your deed restrictions for you, and the permit carries a start deadline, so we get the association’s answer first. Ask your HOA for its submittal form and approved roof colors, and we supply the drawings it needs.

Is cedar or painted wood better for my cover?

Both work. Cedar gives a natural look under the trees but means an engineer-sealed design. Painted framing matched to your trim skips that step and blends with the house. We can show both in a 3D rendering before you decide.

Ready when you are

Get your patio cover quote in Flower Mound, free and no-pressure.

We walk your Flower Mound yard, give you a straight price, and show you how the cover is built and tied in.